ODROID boards do not support the hotplug function of storage devices, and replacing SATA, eMMC, or NVMe while the system power is on will cause serious damage to the board and devices. – DC 19V/7A power adapter is recommended if you two 3.5” HDDs together – DC 15V/4A power adapter is recommended if you don’t use two 3.5“ HDDs – Green (NVMe) – Flashes when NVMe data transfersĪctive Cooling Fan Connector (12V 4-pin, PWM input + TACHO output)ĭC jack : outer (ground) diameter 5.5mm, inner(positive) diameter 2.1mm – Amber (SATA) – Flashes when SATA data transfers – Blue (right, PMIC) – turns on only when the major power rails are working – Blue (left, SLEEP) – turns off only when the system enters into suspend mode

– Red (PWR) – Solid light when DC power is supplied – Maintains system time and BIOS settings LED indicators (Green: Link, Amber: Traffic)ġ x DisplayPort 1.2 (up to x HDMI 2.0 (up to simultaneous display supportġ x Peripheral Expansion Header (24-pin, 2.54mm pitch) Various eMMC modules can be purchased at Hardkernel storeĢ x SATA3 6Gbps ( SATA Port-Multiplier is NOT compatible )ġ x M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards)Ģ x GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps)

Intel UHD Graphics (24/32 EU up to 900MHz)ĭual Channel, up to 2933 MT/s (DDR4-PC23400)ġ x eMMC connector (bootable and selectable on BIOS) Intel Celeron N6005 Processor (10nm, Quad-Core, TDP 10W)

Realtek usb2.0 pc camera driver